Loading...

Where is the model number on a trash compactor?

On a trash compactor, the data tag is almost always within reach of the drawer. Pull the drawer open and check the numbered spots on the diagram — most owners find it on the first or second one.

1
2
3
4

Compactor tag locations

Built-in and freestanding units may use different spots.

  • 1 On the inner cabinet frame, uncovered once the drawer is pulled out.
  • 2 On the inner side wall or top lip of the pull-out drawer.
  • 3 On the rear surface or edge of the upper control panel.
  • 4 Behind the lower kickplate, or on the outer base of the unit.
Found the number? Shop compactor parts

Before you start

Turn the key switch off or unplug the unit before reaching into the drawer area. Take the bag out if it blocks the drawer walls.

  • On many models the drawer lifts off its tracks once the side clips are released.
  • Spray cleaner onto a cloth, not onto the label, to lift grime.
  • Compactor bags and filters are model-specific too — search with the full number.

FAQ

My compactor is built into the counter. Do I need to pull it out?
No. Built-in models almost always show the tag on the cabinet frame, the drawer or behind the kickplate.
Where can I look if the drawer won't open?
Remove the kickplate first, or check the owner's manual and installation papers.